Monolithic L-Shape Casting
Simultaneously casts the vertical wall stem and the horizontal heel or toe base footing in a single seamless concrete pour for maximum structural stability.
Mould
Precast Concrete L-Shape Retaining Wall Steel Mould
Engineered for earth retention, slope stabilization and highway embankment projects, our Precast Concrete L-Shape Retaining Wall Steel Mould casts strong, monolithic cantilever L-profile retaining wall panels. Built using IS 2062 structural mild steel plates up to 8 mm thick and reinforced with ISMC channels and vertical gusset plates, this mould ensures zero wall bulging, slurry-tight joint sealing and rapid demoulding with smooth concrete finishes.
Key Features & Benefits
Built for high-output panel production
Heavy Gusset & Channel Reinforcement
Reinforced with ISMC channel grids and thick vertical gusset plates to prevent bowing or distortion under intense concrete pressure and shutter vibration.
Calculated Tapered Demoulding Draft
Built-in draft angles allow cured L-panels to demould smoothly without cracking corners or damaging concrete faces.
Slurry-Tight Flange Seal System
Precision-fitted side flanges eliminate cement slurry leakage during compaction, resulting in clean edges and smooth surfaces without plastering.
Integrated Balanced Lifting Lugs
Heavy-duty welded lifting eyes positioned at calculated centre-of-gravity points enable safe, balanced crane and forklift handling.
Technical Specifications & Material Build
- Mould Design Category
- Cantilever L-Profile / T-Profile Monolithic Cast Steel Mould
- Material Grade
- High-Grade Structural Mild Steel (IS 2062 Grade)
- Base & Side Skin Sheet Thickness
- 5 mm / 6 mm / 8 mm Heavy-Duty MS Plate
- Framework & Stiffeners
- ISMC channels (75 mm / 100 mm) and heavy vertical gusset plate ribs
- Operation & Panel Release
- Bolted / quick-release side panels with integrated lifting hooks
- Surface Protection & Finish
- Smooth glossy finish with anti-rust epoxy primer and industrial finish paint
- Reusability Rating
- Heavy structural life (1,000+ casting cycles)
- Vibration Compatibility
- Fully compatible with external shutter vibrators and poker needle vibrators
- Panel Alignment
- Quick-locking side flange assemblies for rapid daily casting cycles
Production Capacity & Dimensions
- Featured Standard Model
- 1500 mm (5 ft) wall height | 750 mm (2.5 ft) base slab length | 150 mm wall thickness | 1000 mm - 1500 mm segment width
- 4 Feet Option
- 1200 mm height | 600 mm base length | 125 mm - 150 mm wall thickness
- 5 Feet Option
- 1500 mm height | 750 mm base length | 150 mm wall thickness
- 6 Feet Option
- 1800 mm height | 900 mm base length | 150 mm - 200 mm wall thickness
- 8 Feet Option
- 2400 mm height | 1200 mm base length | 200 mm - 250 mm wall thickness
Primary Applications
Transport & Civil Infrastructure
Highway embankments, flyover approach retaining walls and railway cuttings.
Slope Protection & Hydraulics
Hill roads, mountain slope stabilization, riverbank protection and canal lining walls.
Commercial & Industrial
Underground parking basements, building perimeters and industrial bulk material storage yards.
Designed for dependable production
High-precision precast concrete L-shape retaining wall steel mould in IS 2062 steel, with monolithic L-profile casting, slurry-tight seals and 1,000+ cycle durability. Dimensions and configuration can be discussed based on your project requirement.
Applications
- Retaining structures
- Landscape development
- Civil engineering works
Frequently asked questions
Can this mould be made in custom dimensions?
Share your drawing or requirement with us. Our team will guide you on available configuration options.
How do I get a quote?
Call or WhatsApp us at +91 87804 86457 to discuss your requirement.